Growth area — Beaulieu
Estate-road sub-base and plot topsoil delivered to a rolling handover programme.
Essex
Grab Lorry Hire in Chelmsford
Grab lorries for muckaway, hardcore and site clearance across Chelmsford and Essex. A grab loads itself from a stockpile, verge or trench spoil heap, so you don't need an excavator standing by — and the same lorry can return loaded with aggregate to keep movements down.
Chelmsford site conditions we plan around
Growth-area housing dominates: drainage packages, estate roads and plot finishing on a rolling programme. City-centre regeneration adds constrained, permit-controlled drops. London clay arisings are the norm, so classification and muckaway routing are planned alongside supply rather than after it.
Lead times & access
Stocked lines within 24–72 hours across CM postcodes. Artic loads for A12-corridor commercial sites, 8-wheel tippers and grab for estate and city-centre work.
What we handle on Chelmsford grab hire jobs
- Muck, subsoil and clay loaded direct from a stockpile
- Hardcore, brick and concrete arisings from demolition and strip-out
- Trench spoil where there's no room to keep a machine on standby
- Verge-side loading with an extended-reach arm over a wall or fence
- Two-way loads returning with Type 1, capping or bedding stone
Options for Chelmsford sites
6-wheel grab
Around 12 tonnes — better for narrow residential streets and weight-restricted accesses.
8-wheel grab
Around 16 tonnes per load, the standard choice for construction and groundworks clearance.
Extended-reach arm
Loads over a boundary, hedge or hoarding where the lorry can't get alongside the heap.
Wait-and-load
Lorry stays on site while your machine loads it, for jobs with limited stockpile space.
How it works
01
Confirm the material and reach
What's being loaded, where it sits and how far the arm needs to reach from the road.
02
We book the right grab
6- or 8-wheel, standard or extended reach, sized to your access and weight limits.
03
Loads to your schedule
Single load, day rate or phased across a programme, with transfer notes issued each time.
Compliance and paperwork
Grab haulage runs under registered waste-carrier licences with duty-of-care transfer notes per load, and drivers hold current CPC and site-safety accreditation.
Our credentialsRecent work around Chelmsford
City-centre regeneration plot
Grab drops of bedding stone through a permit-controlled loading window.
A12 commercial platform
Capping delivered in artic loads with clay arisings removed under duty-of-care transfer notes.
Areas covered from our Chelmsford routes
- Braintree
- Basildon
- Brentwood
- Witham
- Maldon
- Billericay
- Ingatestone
Grab hire in Chelmsford — FAQs
How much can a grab lorry take on a Chelmsford job?
An 8-wheel grab carries roughly 16 tonnes per load and a 6-wheel around 12 tonnes. On tighter Chelmsford streets the 6-wheel is often the only option that can get alongside the heap.
How far can the grab arm reach?
A standard arm works to around 6–8 metres from the lorry; extended-reach machines go further and can load over a wall, hedge or hoarding. Tell us the distance and we'll match the machine.
Do I need an excavator on site?
No — that's the main advantage of a grab. It loads itself, so you don't pay for a machine and operator to stand idle waiting for lorries.
Can the grab bring aggregate back into Chelmsford?
Yes. Two-way loads are standard: the grab tips your arisings at a licensed facility and returns with Type 1, capping or bedding stone for the same site.
Need grab hire in Chelmsford?
Tell us the material, volume and access — we come back within one working day.